PRODUCTS
Zipper paint and ink paint curing agent
Related products
Product Introduction
Product Description
LB-1618 is a modified cycloaliphatic amine epoxy curing agent featuring light color and easy processing.
It provides a moderate curing speed, excellent resistance to yellowing, and delivers high hardness, good toughness, and strong mechanical properties after curing.
Key Features
Moderate curing speed
Excellent UV and yellowing resistance
High hardness with good toughness
Excellent mechanical performance
| Property | Unit | Typical Value |
|---|---|---|
| Appearance | — | Colorless to light yellow transparent liquid |
| Color (Gardner) | — | ≤ 1 |
| Amine Value (JIS) | mg KOH/g | 270–300 |
| Viscosity (25°C) | cps | 150–400 |
| Specific Gravity (25°C) | g/cm³ | 1.02 |
| Flash Point (ISO 2719) | °C | 120 |
| Active Hydrogen Equivalent | g/eq | 90 |
| Pot Life (25°C, 100 g) | min | 40–60 |
| Gel Time (25°C, 100 g) | min | ~80 |
Recommended Applications
Suitable for light-resistant solvent-based and solvent-free coatings, including:Hardware and metal part coatings, Composite adhesives, Doming adhesives for nameplates and signage.
Packaging & Storage
Available in 25 kg and 200 kg containers
Store in sealed containers in a cool, dry place, away from open flames.
Handling & Precautions
After thorough mixing with epoxy resin, the system begins to react and releases heat. Viscosity will increase gradually during the reaction.
Larger mix volumes or higher ambient temperatures will accelerate the reaction and curing process and may generate significant heat.
Conversely, lower temperatures or smaller batch sizes will slow curing. Carefully control batch size under different temperature conditions, as pot life will shorten when reaction speed increases. Mixed material should be used as soon as possible.
The curing agent ratio may be adjusted within a limited range to meet specific application requirements. Laboratory validation is strongly recommended before production use.
Perform small-scale trials before full-scale application.
Although this is a solvent-free, environmentally friendly product, direct skin contact may cause irritation or allergic reactions depending on individual sensitivity. Operators should wear protective gloves and ensure adequate ventilation in the work area.
If spilled on skin or clothing, wipe with industrial anhydrous alcohol or acetone, then wash thoroughly with soap and water. In case of eye contact or accidental ingestion, rinse immediately with plenty of clean water, induce vomiting if necessary, and seek medical attention promptly.
Application areas
Electronics and Electrical Engineering
Composite materials
Construction industry
Crystal ornaments
Our factory
After 23 years of continuous development, the company has grown into a national-level high-tech enterprise specializing in the R&D, production, sales, and technical services of epoxy resin adhesives, epoxy resin curing agents, and new UV-curable materials.
Core Advantages
1. Comprehensive R&D and manufacturing capabilities, one-stop solutions
Liantuo is a national-level high-tech enterprise specializing in the R&D, production, and sales of epoxy resins, curing agents, and UV-curable adhesives. The company boasts a comprehensive system that covers everything from formulation design and performance control to large-scale production. We can tailor-make exclusive formulations based on customers’ specific application scenarios, meeting diverse requirements for strength, transparency, weather resistance, and curing speed.
Comprehensive R&D and manufacturing capabilities, one-stop solutions
The company strictly adheres to international standards and has obtained ISO 9001 certification for its international quality management system. From raw material selection and batch quality control to final product inspection, we employ standardized procedures to ensure that our products achieve industry-leading levels in terms of safety, stability, and consistency.
3. A professional R&D team drives continuous innovation.
Liantuo boasts an R&D team composed of senior professors, senior engineers, and specialized technical personnel, dedicated to innovation in epoxy resin and curing agent formulations as well as research into new materials. Our R&D efforts cover epoxy systems featuring high transparency, low yellowing, and excellent weather resistance, as well as rapid curing and impact resistance—continuously providing customers with high-performance products and differentiated technical support.
4. Efficient Response and Stable Delivery
The company has established a comprehensive sales and technical service system, providing round-the-clock, all-around pre-sales and after-sales support. Engineers are available online at any time to offer technical guidance, application testing, and on-site services. A well-established supply chain ensures rapid delivery and stable supply. Our long-term collaborative experience with clients across multiple industries helps customers enhance application efficiency and product quality.
Certificate
Message
Category:
Epoxy Systems
Keywords:
Zipper paint and ink paint curing agent
Product Categories
Copyright ©
